Auto Meter 233904 Autogage Pedestal Mount Monster Shift-Lite Tachometer Gauge

Auto Meter 233904 Autogage Pedestal Mount Monster Shift-Lite Tachometer Gauge Review

Auto Meter 233904 Autogage Pedestal Mount Monster Shift-Lite Tachometer Gauge Feature

• Black gauge face and silver bezel
• Has a maximum range of 10,000 RPM
• Integrated mounting pedestal and shift-lite
• Size of this pedestal mount monster shift-lite tachometer gauge is 5" (127mm)
• Operates on 4, 6, or 8 cylinder engines with points and 12V electronic ignitions

Auto Meter Autogage Pedestal Mount Tachometers are race proven favorite for over 30 years and a perfect solution for the budget-minded enthusiasts. These tachometers are built with the same sturdy construction and attention to detail as all the other Auto Meter gauges, but priced significantly lower. Auto Meter was the very first to unleash a Monster in the world of professional motorsports. Now the legendary 5" Monster tachometer is available for hardcore street applications from Autogage! The Shift-Lite (TM) signals the driver at each pre-selected shift point with a bright amber light for grabbing the perfect gear without having to look down. This allows the driver to concentrate on the track, and most importantly, crossing the finish line first. These tough tachometers are resistant to vibration and feature Auto Meter's high-tech air core movement for serious accuracy. We recommend Auto gage series tachometers for those of you who want a simple looking, high quality, and feature-rich tachometer without spending a lot of money.

Auto Meter 2155 5" Carbon Fiber Tachometer Cup

Auto Meter 2155 5" Carbon Fiber Tachometer Cup Review

Auto Meter 2155 5" Carbon Fiber Tachometer Cup Feature

• For 5 inch pedestal mount tachometer with 3-3/8 inch case
• It is a tachometer cup
• Made of carbon fiber
• Mount your gauges on the dash, below the dash or outside on hood cowl for Pro-Street look
• Attached and released in seconds

Auto Meter 5 inch (127 millimeter) Carbon Fiber Tachometer Cup are for 5 inch pedestal mount tachometer with 3-3/8 inch case.

Equus 6086 Black Tachometer - Measures 2 1/2-Inches

Equus 6086 Black Tachometer - Measures 2 1/2-Inches Review

Equus 6086 Black Tachometer - Measures 2 1/2-Inches Feature

• Displays 0 to 8000 RPM in 100 RPM increments
• Black racing design with back-lit illumination for night use
• Full 270-degree sweep for increased visibility
• Works on conventional and electronic ignition systems
• Installation adaptors sold separately

This tachometer displays 0 to 8000 RPM in 100 RPM increments and has the popular black racing tachometer design. It is provided with back-lit illumination for night use and an original equipment manufacturer style lighted pointer. It has a full 270-degree sweep for increased visibility and works on conventional and electronic ignition systems. The installation adaptors are sold separately.

Professional Digital Laser Photo Tachometer Non Contact RPM Tach

Professional Digital Laser Photo Tachometer Non Contact RPM Tach Review

Professional Digital Laser Photo Tachometer Non Contact RPM Tach Feature

• Large LCD displaying. Wide measuring range & high resolution. The use of durable. Dimension: approx. 131 (L) x 70 (W) x 29 (D) mm (5.16¡¯ x 2.76¡¯ x 1.14¡¯ inch)
• The last value/min . Value will be automatically stored in memory and can be displayed by turn anytime.
• The RPM of motors and machine parts. The housing has been carefully shaped to fit comfortably in either hand.
• Display: 5 digits, 18 mm (0.7¡± inch) LCD with Function Annunciation. Digital display gives exact RPM with on guessing or errors. It is a great tool to measure.
• In wood and metal working it can be used to accurately measure the speed of a lathe.

Description£º
This tachometer is a high quality instrument to measure the Rotational Speed (RPM) with wide measuring range and high resolution. It is featured with high accuracy measurement, quick measuring time and long detecting distance up to 500 mm (20 inch) with Laser.
This tachometer is very easy to use by applying a reflective mark (included in package) on target object, then aim at the mark by Laser beam. This tachometer has wide range of applications include measuring rotating speed of machine, motors, model cars, wheels, lathe for metal or wood cutting work etc.

Specifications£º
Display: 5 digits, 18 mm (0.7¡± inch) LCD with Function Annunciation.
Testing Range: 2.5 ~ 99,999 RPM (rate / min).
Resolution:
0.1 RPM (2.5 ~ 999.9 RPM) .
1 RPM (over 1,000 RPM).
Accuracy: ¡À(0.05 % + 1 digit).
Sampling Time: 0.8 seconds (over 60 RPM).
Test Range Selection: Automatic.
Memory: Maximum value, Minimum value and Last Measured value.
Detecting Distance: 50 ~ 500 mm (2 ~ 20 inch) (Laser).
Time base: Quartz Crystal.
Circuit: Exclusive one-chip of microcomputer LSI circuit.
Power: 9V PP3 Battery (included).
Operating Temperature: 0 ~ 50 ¡ãC (32 ~ 122 ¡ãF).
Dimension: approx. 131 (L) x 70 (W) x 29 (D) mm (5.16¡¯ x 2.76¡¯ x 1.14¡¯ inch).
Weight: approx. 160g

Package Content:
1 x New Digital Laser Photo Tachometer Non Contact RPM Tach
1 x English Manual
1 x Battery 9V
1 x Carrying Bag
3 x approx. 20cm of reflective stripes

GTC TA110 Laser Tachometer and Counter

GTC TA110 Laser Tachometer and Counter Review

GTC TA110 Laser Tachometer and Counter Feature

• State of the art patented ergonomic design allows to simply attach a small piece of reflective tape to the shaft or rotating part, aim the laser beam to the reflective mark and read the RPM or revolutions count on the large display
• Measures from 1 to 99999 RPM with 0.05 percent accuracy and a 2 to 20 inches (50 to 500 mm) measuring range
• Quick selection between RPM and count functions and has Maximum and minimum memory recall functions as well as continuous reading and data hold modes
• Large LCD display with symbols and backlight and Quick response time less than 0.3 seconds
• Laser powered optical system is easy to use under all light conditions; only setup required is a reflective mark on the rotating part

GTC laser tachometer and counter can be used to measure RPM on any spinning shaft, pulley, wheel, drive belt, fan, or other rotating objects, safely, accurately and easily due to its unique ergonomic design. Wide measuring range of 1 to 99,999RPM, reading distance of 2 inches to 20 inches, maximum and minimum memory recall, the response time will be less than 0.3 sec, count function and auto power off.

Sunpro SST802R 3-3/8" Retro Super Tachometer

Sunpro SST802R 3-3/8" Retro Super Tachometer Review

Sunpro SST802R 3-3/8" Retro Super Tachometer Feature

• Legendary 70?s styling reproduced with modern electronics inside and retro looks outside
• 3-3/8 inch diameter 250 degree sweep face 0-8000 RPM range and 360 degree lighting
• Internal settings for 1,2,4,6,8,and 10 cylinder engines
• All metal tach housing with removable chrome metal cup and includes two mounting brackets for either steering column or dash mount
• Vibration proof air core meter design with 360 degree lighting that avoids uneven spots for better night visibility

Sunpro 3-3/8" inch Retro Super Tachometer, born in the 70’s, this tachometer was an icon in speed parts circles. This tachometer sold in legendary numbers and can still be found in hot rides today after 40 years of hard use. If you are one of the lucky ones to own and original, thanks for the sales. If not, here’s your chance to own your own legendary Sun Super Tach reproduced with modern electronics inside and retro looks outside. Carefully reproduced to match original dimensions. This tachometer will put the finishing touches on your hot rod restoration project. Many components are interchangeable with the original 70’s Sun Super Tachs. The legend gets even better.

ACCEL 49365 Tachometer Adapter

ACCEL 49365 Tachometer Adapter Review

ACCEL 49365 Tachometer Adapter Feature

• Produces a 12-volt square wave signal
• For coil negative (white lead wire) trigger
• Designed for tachometers that were previously wired to the coil negative terminal
• Get accurate readings from your tachometer

The Accel Tachometer Adapters are designed for tachometers that were previously wired to the coil negative terminal using either a points or electronic ignition module. The green lead in the wire harness from the Accel 300+ ignition control produces a 12-volt square wave signal.

Bikers Choice Mini Tachometer 76071

Bikers Choice Mini Tachometer 76071 Review

Bikers Choice Mini Tachometer 76071 Feature

• Chrome-plated universal mounting bracket
• Wiring instructions included
• 2-1/2 diameter with white face

Chrome-plated universal mounting bracket
Wiring instructions included
2-1/2 diameter with white face

Auto Meter 233911 Autogage Pedestal Mount Shift-Lite Tachometer Gauge

Auto Meter 233911 Autogage Pedestal Mount Shift-Lite Tachometer Gauge Review

Auto Meter 233911 Autogage Pedestal Mount Shift-Lite Tachometer Gauge Feature

• Black gauge face and silver bezel
• Has a maximum range of 10,000 RPM
• Integrated mounting pedestal and high intensity shift-lite
• Size of this pedestal mount shift-lite tachometer gauge is 5" (127mm)
• Operates on 4, 6, or 8 cylinder engines with points and 12V electronic ignitions

Auto Meter Autogage Pedestal Mount Tachometers are race proven favorite for over 30 years and a perfect solution for the budget-minded enthusiasts. These tachometers are built with the same sturdy construction and attention to detail as all the other Auto Meter gauges, but priced significantly lower. These tachometers offer a variety of performance oriented options from shift lights to memory recall functions, coupled with a trade marked aluminum and rubber shock strap design for the best vibration protection available. The Shift-Lite (TM) signals the driver at each pre-selected shift point with a bright amber light for grabbing the perfect gear without having to look down. This allows the driver to concentrate on the track, and most importantly, crossing the finish line first. These tough tachometers are resistant to vibration and feature Auto Meter's high-tech air core movement for serious accuracy. We recommend Auto gage series tachometers for those of you who want a simple looking, high quality, and feature-rich tachometer without spending a lot of money. Auto Meter gauges have a quality unmatched by any other gauge accessory on the market and comes with Auto Meter's trademark "Super Bezel" in an attractive, black finish.

Hardline Products HR-8061 Hour/Tach Meter

Hardline Products HR-8061 Hour/Tach Meter Review

Hardline Products HR-8061 Hour/Tach Meter Feature

• Easy installation, no power or ground required, just peel and stick
• Works on pencil/stick type coils and earlier generation ignitions
• Works on any gasoline engine 2/4 stroke
• Waterproof, firing pattern 1 spark equals 1 RPM
• Includes two sided tape, wire ties, pick-up wire and screws

Hardline Products surface mounted Hour Meter. Track the service life of your powersports vehicle. Oil changes, valve adjustments, spark plugs or any other required maintenance. Keeps your warranty by following strict maintenance schedules using this meter to track run time.

Equus 5568 Pro-Timing Light with Tool Case

Equus 5568 Pro-Timing Light with Tool Case Review

Equus 5568 Pro-Timing Light with Tool Case Feature

• Features shockproof housing, molded boots, and built-in hand guard for protection
• Detachable 6-foot leads with metal inductive pickup
• Patented skip circuitry test up to 9,990 RPM
• Works with 12-volt negative-ground vehicles, distributorless ignition systems, and adjustable and non-adjustable timing systems
• Switches from 2 to 4 cycles

This timing light includes a full range of options designed to meet the demands of DIYers with many of the features that professional installers demand. This pro timing light with tool case works on adjustable and non-adjustable timing systems. It also works on both domestic and import vehicles. This timing light is designed for use with all 12-volt negative-ground vehicles and it may also be used on vehicles equipped with a distributorless ignition systems. It has a four function digital readout and easy-to-read backlit LCD, which includes tachometer ranges from 249 to 9,990 RPM, advance degrees from 0 to 90-degrees, dwell from 0 to 180-degrees, and 2-12 cylinders. It switches from 2 cycles to 4 cycles.

Auto Meter 6299 Cobalt Pedestal Mount Tachometer Gauge

Auto Meter 6299 Cobalt Pedestal Mount Tachometer Gauge Review

Auto Meter 6299 Cobalt Pedestal Mount Tachometer Gauge Feature

• Black colored face with numbers in white
• Includes a red pointer with a clear anodized bezel
• Overall diameter is 5" and reads from 0-10,000 RPM
• The shift light is 1.625" in diameter and blue in color
• Operates on 4, 6 or 8-cylinder engines with points, electronic and most 12 V high-performance racing ignitions

Auto Meter Cobalt Pedestal Mount Tachometer Gauges have the look and feel of the gauges from back in the day but with a twist of styling. They feature a black face, anodized bezel, white numbering and blue accents. The explosion of Cobalt blue light shines through the dial and into any interior scheme during night time. The brilliant LED Cobalt blue light shines through the dial of the face to light up the numbers. It is easy on the eyes and even easier to read at a simple glance. It includes a rugged, rubber-lined shock proof strap with mounting base and operates on standard/electronic and most high performance electronic racing ignitions. Auto Meter offers an extensive selection of accessories to use with your quality instruments for maximum performance, whether you are looking for high quality electric accessories to supplement your Auto Meter products or just need parts for a customer application. Mountable in every conceivable position, the versatility and durability of Pedestal Mount tachometer have made them a race proven favorite for over 30 years. These tachometer offer a variety of performance oriented options from shift lights to memory recall functions, coupled with a trade marked aluminum and rubber shock strap design for the best vibration protection available.

Sunpro CP7901 Super Tachometer II - Black Dial

Sunpro CP7901 Super Tachometer II - Black Dial Review

Sunpro CP7901 Super Tachometer II - Black Dial Feature

• Black face tachometer with 3 3/8-in dial
• Has a 0 to 8,000 RPM range
• Internal settings compatible with 4, 6, and 8 cylinder and 12-volt negative ground engines
• Compatible with most automotive ignition systems
• Includes mounting hardware

This tachometer has a black face with a dial measuring 3 3/8-in. It has a subtle metallic body and a smooth chrome finish. It has a 0 to 8000 RPM range and internal settings for 4, 6, and 8 cylinder and 12-volt negative ground engines. It has internal dial lighting, a 250-degree dial sweep, and is compatible with most automotive ignition systems including standard or electronic distributors, distributorless systems, and most aftermarket systems, excluding magnetos. It has a fast needle response and covers 90-percent of full scale in 4/10th of a second.